kaiyun体育开云(中国)官方网站

Jiaxing Yinghua Testing Equipment Co., Ltd

CN EN

Product

Wire and cable combustion series

Home 首页-Product-Wire and cable combustion series-The medium pressure fire resistance test device does not have

The medium pressure fire resistance test device does not have

The structure, dimensions, and test requirements for extruded insulation and fire-resistant (including halogen-free low smoke flame retardant and fire-resistant) power cables with rated voltages of 6kV (Um=72kV) to 35kV (=405kV) suitable for fixed installation in distribution networks or industrial devices are applicable to TICW 8-2012.

The medium voltage fire-resistant cable testing machine focuses on cable flame retardant and fire-resistant testing experiments. In the testing equipment, Yinghua continuously promotes technological reform and innovation through multiple perspectives, technical discussions and exchanges, and the introduction of industry-leading technology, making this medium voltage cable fire-resistant testing machine maintain a leading level in the industry.

Online contact Telephone contact

Technical parameter

Basic technical parameters

Overall dimensions:

Air source console 900x800x1200mm

Pressurized control cabinet 900x800x1200mm

Effective length of belt shaped blowtorch 500mm

Single phase transformer: (1) Input: Single phase 380V, 50KVA (2) Output: Sample applied voltage: AC1KV~120KV adjustable

Voltage regulator: single-phase 380V, 50KVA

Sample applied voltage: AC1KV~120KV adjustable

Test transformer: 50KVA

Short circuit or open circuit of the sample, stop the fire supply and cut off the voltage, with a fault prompt

Fire supply time: 0~999Min adjustable

Leakage current detection device: Real time monitoring of leakage current

Control and regulation of air source: The air flow rate is adjustable with a mass flow meter of 0-200L/Min, and the propane flow rate is adjustable with a mass flow meter of 1-20L/Min.