The TBQ type cross-linked cable slicing machine is applicable to the GB/T2951-2008 "General Test Methods for Insulation and Sheath Materials of Cables and Optical Systems" standard, and is used for the production of dumbbell sheets for mechanical performance testing of polyethylene cross-linked cables. It is also a necessary tool for sample slicing preparation during micropore impurity testing of various types of polyethylene high-voltage cross-linked cables with voltages ranging from 35000 to 22000 volts, such as GB/T12706 and GB/T11017

This machine can perform axial and longitudinal cutting on cable samples to obtain high-quality slices with different thicknesses of 0.1~2mm for testing purposes. Users must carefully read this user manual and relevant chapters in national standards such as GB11017, GB12705, and GB2951 to master the relevant test methods and steps, in order to successfully complete this test project. This machine adopts touch screen, PLC The stepper motor drives the sample holder to move to complete the cutting stroke (the cutting speed can be set arbitrarily on the touch screen). The cutting thickness is controlled by the stepper motor driving the sample holder to move up and down, (The cutting thickness can be directly input on the touch screen. If the thickness is the same as last time, it can be set without pressing the start button. The machine will automatically open the locking device, adjust the set cutting thickness, lock the locking device, start the cutting workbench, start cutting, and automatically return to the starting position after the cutting is completed. After the work is completed, the machine will stop by default. If you still need to continue cutting pieces of the same degree, press the start button.) Yes The rotation of two sets of fixtures can complete the holding of transverse and longitudinal specimens. Our company ensures the manufacturing process with high-precision manufacturing processes to obtain high-quality sample slices